How To Make A Windows Xp Bootable Usb Flash Drive

This guide explains how to create a Windows bootable USB bulldoze for the following Windows versions: Windows XP, Windows Vista, Windows seven, Windows 8, Windows 8.ane, Windows 10, andWindows 11.

Creating a bootable USB drive volition allow you to install Windows from the USB drive directly.

To be able to install Windows from a USB, you demand have ane of the following:

• the ISO image of the Windows version
• or the original installation disc of the Windows version

If you don't have either, you can instead download an EasyRE ISO image that can be made into a bootable USB or CD to restore your PC.

Contents

• i Prerequisites
  • 1.1 USB Drive
  • 1.2 BIOS/UEFI configuration
  • one.3 ISO image
• 2 Create a Windows XP bootable USB
  • 2.1 Using Piece of cake USB Creator 2.0
  • 2.2 If you have the installation disc (CD)
• 3 Create a Windows Vista bootable USB
  • iii.one If yous have the ISO image
    • 3.ane.1 Using Like shooting fish in a barrel USB Creator 2.0
    • 3.1.2 Using Windows 7 USB/DVD Download Tool
  • 3.two If you have the installation disc (DVD)
• 4 Create a Windows vii bootable USB
  • 4.1 If you have the ISO image
    • 4.i.one Using Easy USB Creator 2.0
    • 4.ane.ii Using Windows 7 USB/DVD Download Tool
  • four.2 If you have the installation disc (DVD)
• v Create a Windows 8 / 8.ane bootable USB
  • 5.1 If y'all have the ISO image
    • five.1.1 Using Easy USB Creator 2.0
    • 5.1.2 Using Windows vii USB/DVD Download Tool
  • 5.2 If y'all have the installation disc (DVD)
• half dozen Create a Windows 10 bootable USB
  • 6.i If y'all have the ISO image
    • 6.one.1 Using Easy USB Creator two.0
    • vi.i.two Using Windows 7 USB/DVD Download Tool
  • 6.2 If yous accept the installation disc (DVD)
• 7 Troubleshooting
  • 7.ane Setup cannot find the End User Licensing Agreement (EULA)
  • 7.2 Download Windows vii USB/DVD Download Tool
  • 7.3 Bootable USB will not boot
• 8 More than Information
  • 8.one Support Links
  • 8.ii Applicable Systems

Prerequisites

Before you kickoff creating a bootable USB flash drive to install Windows (XP, Vista, seven, 8, 8.ane, 10), yous need to make sure that:

• The USB bulldoze is empty and properly formatted
• The USB bulldoze is bootable
• Your BIOS/UEFI is properly configured to boot from the USB flash bulldoze first
• You take the ISO image of Windows XP, Vista, 7, 8 or 8.1. If you lot have the original Windows installation disc, you lot can apply that instead of the ISO epitome.
• Software needed to write the ISO image to the USB drive or alternatives, such as Easy USB Creator 2.0 by NeoSmart or the Windows 7 USB/DVD Download Tool past Microsoft.

USB Bulldoze

The USB drive you lot want to make bootable should take at least 4 GB in available size.

BIOS/UEFI configuration

To make certain that your BIOS/UEFI is configured to boot from a USB drive, follow our Boot from USB bulldoze guide. You demand to make sure that:

If a Kick Device menu doesn't appear on your screen where the USB drive is plugged-in, bank check the BIOS/UEFI settings. A Boot Device carte can look similar this, depending on your estimator model and Windows version:

If y'all are using a new computer with UEFI/EFI, brand sure that the Boot Legacy option is enabled:

If you're using a computer with Fast Boot selection, make sure that Fast Kicking is disabled.

If your BIOS menu doesn't list a USB item in the BIOS settings, it may mean that information technology can't kicking from a USB drive. You lot tin can endeavour with the USB drive plugged-in and then boot into BIOS directly.

If the item doesn't appear, you demand to use the original Windows installation CD or DVD to install Windows or admission the repair tools.

If you lot demand to use the repair tools of an original Windows installation CD/DVD, y'all can too utilise Piece of cake Recovery Essentials (download link) and run Automated Repair to automatically find and gear up boot errors.

Download Easy Recovery Essentials

ISO image

If you lot don't have the ISO image to create the bootable USB drive, you can download an official image from Microsoft's website.

You demand to have the product (or license) fundamental.

Create a Windows XP bootable USB

You tin can create a bootable USB drive with Windows XP by following these instructions.

Using Easy USB Creator ii.0

Piece of cake USB Creator can quickly convert the ISO images into bootable USB drives, with but a single click:

Download Easy USB Creator 2.0

To fire Windows XP to a USB drive using Easy USB Creator 2.0, simply follow these steps:

1. Download USB Creator two.0
2. Install Easy USB Creator 2.0
3. Browse the Windows XP ISO Image to load at the ISO File field
4. Select the destination of your USB Bulldoze at the Destination Bulldoze field
5. Start

Piece of cake USB Creator 2.0 supports both USB two.0 and USB three.0.

It's compatible with Windows XP, Windows Vista, Windows seven, Windows 8, Windows eight.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in society to use Piece of cake USB Creator ii.0

If you have the installation disc (CD)

If you have the original Microsoft Windows XP Professional person installation CD, yous can use the CD to create a bootable USB using PE Architect.

It's important to have the following before y'all get-go:

• The Windows Server 2003 SP1 archive. If not, download from Microsoft now: Microsoft Windows Server 2003 Service Pack 1 (32 scrap)
• The PE Architect software (BartPE). If not, download BartPE
• The original CD of Windows XP Professional, not a Windows XP Home CD.

  A Windows XP Domicile CD will not work.

To create the bootable drive with Windows XP, follow these steps:

1. Boot into the system
2. Download the PE Builder software from http://world wide web.nu2.nu/pebuilder/
3. Install the PE Architect to C:\. The final path should be C:\PEBuilder to brand the next steps easier.

Inside the PEBuilder folder, create a new folder named SRSP1. This binder's path should be C:\PEBuilder\SRSP1.

• Download the Windows Server 2003 SP1 archive from http://world wide web.microsoft.com/en-usa/download/details.aspx?id=1143…
• Rename the archive downloaded from Microsoft to MS-WS-SP1.exe
• Open Command Prompt. You can besides open up it by typing cmd in the Run dialog box and pressing Enter afterwards.
• Blazon the cd command to go to the binder where the MS-WS-SP1.exe file exists:

  cd c:\downloads

  Don't type MS-WS-SP1.exe in the path to a higher place. You lot only need to become to the folder where the file exists.

  Replace c:\downloads with the alphabetic character of the drive and the directory where the MS-WP-SP1.exe file exists.

• Blazon MS-WS-SP1.exe -x to begin the extraction procedure, press Enter
• Cull to extract the files to the same folder, due east.g. c:\downloads:

  

  PEBuilder: Excerpt Files

• In Command Prompt, you now demand to become to the extract folder at the i386 sub-folder.To do so, blazon the aforementioned cd control, if you're still at the c:\downloads binder in Control Prompt and y'all haven't created a new folder for the extracted files:

  cd i386

  If you created a new folder for the extract files, say Extract, in c:\downloads, update the cd control to go to that folder:

  cd c:\downloads\Extract

  Then, type cd i386, press Enter

• One time inside the i386 folder via Command Prompt, type:

  copy setupldr.bin c:\PEBuilder\SRSP1

  Supercede c:\PEBuilder\ with the path where the PE Builder software is installed, if this was changed in previous steps.

• While still in Command Prompt, expand the ramdisk.sys file with this command:

  expand -r ramdisk.sy_ c:\PEBuilder\SRSP1

  Supervene upon c:\PEBuilder\ with the path where the PE Architect software is installed, if this was inverse in previous steps.

• Go to My Computer
• Go to PEBuilder folder
• Go to SRSP1 folder
• Check that yous have the 2 files listed in that location: setupldr.bin and ramdisk.sys

  

  PEBuilder: Bank check that yous have the files copied

• Insert the Windows XP Professional CD in the deejay tray
• Launch PE Builder
• Make the following changes before you lot click Build:

  

  BartPE: Configuration for Windows XP USB

  • At the Source field, blazon the alphabetic character of the drive for the Windows XP CD, due east.g. east:\
  • At the Output field, type BartPE
  • Go out the Custom field blank
  • Media output should be None
• Click Build
• When the build process is consummate, click Close
• Go to Command Prompt and then go to the PEBuilder binder by typing the cd control:

  cd c:\PEBuilder

• Type this command (make sure the USB wink bulldoze is non removed) and press Enter:

  pe2usb -f d:

  Replace d: with the alphabetic character of the drive where your USB flash drive is loaded.

• Blazon YES, when prompted to begin the process. Press Enter after typing YES.
• Press any key to get out the pe2usb process, after the process is consummate
• Safely remove the USB flash drive from the port
• Remove the Windows XP CD from the deejay endeavor
• Reboot the system to check if the USB flash bulldoze is now bootable with Windows XP Professional person

If your computer doesn't boot into the USB drive directly, get to Prerequisites > BIOS/UEFI configuration or read the Kicking from USB drive guide to configure your BIOS bill of fare to boot from a USB device get-go.

Create a Windows Vista bootable USB

Depending if y'all have the ISO prototype of Windows Vista or the original DVD, you tin can use Easy USB Creator 2.0 or the diskpart utility to create the bootable USB.

If you have the ISO image

Using Easy USB Creator 2.0

Piece of cake USB Creator can speedily convert the ISO images into bootable USB drives, with just a single click:

Download Easy USB Creator 2.0

To fire Windows Vista to a USB drive using Easy USB Creator 2.0, simply follow these steps:

1. Download USB Creator 2.0
2. Install Like shooting fish in a barrel USB Creator 2.0
3. Browse the Windows Vista ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Bulldoze field
5. Showtime

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It's compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.one, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in order to utilise Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

To create the bootable drive with the Windows vii USB/DVD Download Tool, follow the steps from Using the Windows 7 USB/DVD Download Tool from Windows 8/8.1.

While the proper noun is "Windows 7", y'all can use the tool for Windows Vista systems also.

If you have the installation disc (DVD)

To create a bootable USB with Windows Vista and install the operating system from that USB drive, follow the steps.

Y'all'll be using the diskpart utility, available in Windows Vista, to make the USB drive bootable. You'll copy the files from the installation disc (DVD) to the USB drive after the diskpart utility process is finished.

The instructions are:

1. Boot your computer
2. Open up Control Prompt and run it every bit Ambassador.Y'all can go at Showtime > All Programs Accessories > Control Prompt or type cmd in the search field.To run Command Prompt equally Administrator, right-click on the Command Prompt item and select Run as Administrator.
3. When Command Prompt opens, blazon this control and press Enter:

   cd c:\windows\system32

   Replace c:\ with the letter of the commuter where your Windows Vista is installed: C:\, D:\ etc.

4. Insert the USB flash drive in the USB port
5. Type:

   diskpart

6. Press Enter
7. Type:

   listing disk

8. Press Enter
9. After yous press Enter for the list disk command, Command Prompt will list the drives that are connected to your figurer. Find the USB drive and its respective number.

   

   Command Prompt: list disk

10. And so, blazon this command:

    select disk X

    Where X is the number of the USB flash drive listed by Command Prompt.

    The confirmation bulletin should exist:

    Disk 1 is at present the selected disk.

11. Press Enter
12. Type clean and press Enter
13. Blazon create division chief and press Enter
14. Type select partitioning 1 and press Enter
15. Blazon active and press Enter
16. Blazon this control and press Enter afterward:

    format fs=ntfs

    It may accept a few minutes to format the entire USB wink drive, depending on its size. Still, you can utilize the quick parameter to format the drive more chop-chop:

    format fs=ntfs quick

17. Type assign, press Enter
18. Blazon go out, printing Enter
19. Insert the Windows Vista DVD in the optical drive
20. Go to My Calculator
21. Note the letter of the drive where the Windows Vista DVD is loaded, eastward.thousand. D:\, E:\
22. Go dorsum to Command Prompt and check if the USB flash drive has been formatted
23. When the format process is complete, blazon this command and printing Enter:

    d: cd boot

    Supersede D: with the letter of the drive where the Windows Vista DVD is loaded

24. Then type cd kicking and press Enter
25. Blazon this command and press Enter:

    bootsect.exe /nt60 f:

    Where f: is the letter of the drive where your USB wink drive is loaded

26. Copy all files from the Windows Vista DVD on the USB wink bulldoze.To open the contents of the DVD (and not load the splash screen of the Windows Vista DVD), right-click on the bulldoze and click Open.

If yous followed the to a higher place instructions correctly, the USB flash drive should now be bootable with Windows Vista.

Yous tin check this past plugging the USB and rebooting the organisation. To make certain that your computer boots from a USB bulldoze first, and not from the hard disk, go to BIOS/UEFI configuration.

Create a Windows 7 bootable USB

You can create the bootable USB bulldoze with Windows 7, if:

• you accept the ISO epitome of Windows 7
• or you accept the original installation DVD of Windows 7

If you have the ISO paradigm

Using Easy USB Creator 2.0

Piece of cake USB Creator can rapidly convert the ISO images into bootable USB drives, with only a single click:

Download Like shooting fish in a barrel USB Creator 2.0

To burn Windows 7 to a USB drive using Easy USB Creator two.0, just follow these steps:

1. Download USB Creator 2.0
2. Install Easy USB Creator ii.0
3. Browse the Windows 7 ISO Paradigm to load at the ISO File field
4. Select the destination of your USB Bulldoze at the Destination Drive field
5. Start

Piece of cake USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It'southward compatible with Windows XP, Windows Vista, Windows 7, Windows eight, Windows 8.1, Windows ten plus the Windows Server editions (2003, 2008, 2012). You lot must have .Net Framework 2.0 or higher in order to utilize Easy USB Creator 2.0

Using Windows seven USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO paradigm from the ISO image you purchased and downloaded from Microsoft.

Before yous continue with these instructions, please brand sure that:

• You accept the Windows vii USB/DVD Download Tool downloaded. If non, download Windows 7 USB/DVD Download Tool now.
• You have the Windows vii ISO Paradigm set

The instructions are:

1. Download Windows 7 USB/DVD Download Tool from http://wudt.codeplex.com/ and launch it
2. At the Source File field, click Scan and find the Windows 7 ISO image on your reckoner and load it

   

   Windows 7 USB/DVD Download Tool: Source File

3. Click Side by side
4. Select USB Device
5. Select the USB flash drive from the drop down menu
6. Click Brainstorm copying
7. Go out the application, when the procedure is consummate

If you lot have the installation disc (DVD)

You can use a USB flash drive (come across Prerequisites for more than data) to install Windows 7 from.

To do and so, yous need to make the USB flash drive bootable kickoff and then use the original Windows 7 installation disc (DVD) to re-create the contents of the DVD to the USB drive.

The diskpart utility, part of Windows 7, volition be used.

Follow these steps (similar to Create a Windows Vista bootable USB > If yous have an installation disc):

1. Start the computer
2. Open Command Prompt as Administrator. Go at Start > All Programs Accessories > right-click on the Control Prompt item and select Run as Administrator.
3. Enter the password for the Ambassador business relationship
4. At Command Prompt, type:

   cd c:\windows\system32

   Supercede c:\ with the letter of the commuter where your Windows seven is installed: C:\, D:\ etc.

5. Press Enter
6. Insert the USB bulldoze that y'all desire to make bootable in an available port
7. Type diskpart and press Enter
8. Type list deejay and press Enter

   

   Control Prompt: list disk

9. Observe the USB drive and its corresponding number in the list provided by Command Prompt
10. Type this control and printing Enter:

    select disk Ten

    Where X is the number of the USB drive listed past Command Prompt higher up.

    The confirmation message should be:

    Deejay 1 is now the selected deejay.

11. Type clean, printing Enter
12. Blazon create partition primary, press Enter
13. Type select partition one, printing Enter
14. Type active, press Enter
15. Blazon format fs=ntfs and press Enter.

You lot tin can use the quick parameter to format the bulldoze more than speedily: format fs=ntfs quick

• Insert the Windows 7 DVD and go to My Figurer. Note the letter of the bulldoze where the DVD is loaded, e.m. D:\, Eastward:\
• Type assign, printing Enter
• Type get out, press Enter
• After the format process is complete, type this command in Command Prompt and press Enter:

  d: cd kick

  Where d: with the letter of the drive where the Windows vii DVD is loaded.

• Type cd boot, press Enter
• Type this control and press Enter:

  bootsect.exe /nt60 f:

  Where f: is the letter of the bulldoze where the USB flash drive is loaded

• Open the contents of the Windows 7 DVD: right-click on the drive and click Open
• Copy all files from the DVD to the USB

Create a Windows eight / 8.i bootable USB

Depending if you take the ISO image of Windows Vista or the original DVD, yous tin can use Easy USB Creator 2.0 to create the USB if you lot have the ISO image or the diskpart utility to create the bootable USB, if you have the DVD.

If yous have the ISO image

Using Easy USB Creator two.0

Like shooting fish in a barrel USB Creator tin quickly convert the ISO images into bootable USB drives, with just a single click:

Download Easy USB Creator 2.0

To burn Windows 8 or 8.1 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

1. Download USB Creator two.0
2. Install Piece of cake USB Creator ii.0
3. Scan the Windows eight or Windows 8.1 ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Bulldoze field
5. Start

Easy USB Creator 2.0 supports both USB 2.0 and USB 3.0.

Information technology'southward compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows ten plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or higher in guild to apply Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is bachelor to download and you can employ it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

While the name is "Windows 7", y'all can use this tool on a Windows 8 or viii.1 system too.

Earlier you continue with these instructions, please make sure that:

• You take the Windows 7 USB/DVD Download Tool downloaded. If not, download the Windows 7 USB/DVD Download Tool now.
• You have the Windows 8 or 8.i ISO Image set

The instructions are:

1. Launch the Windows seven USB/DVD Download Tool
2. At the Source File field, click Browse and find the Windows 8 or 8.i ISO image on your calculator

   

   Windows vii USB/DVD Download Tool: Source File

3. Click Next
4. Insert the USB flash drive in an available port on your computer. Make sure it's loaded in My Computer.
5. At Step 2, select USB Device to write the ISO paradigm to the USB drive. Yous can click DVD to write the ISO image to a DVD instead.

   

   Windows 7 USB/DVD Download Tool: Choose Media Type

6. At Step 3, select the USB flash drive from the drib down menu. If the drive isn't loaded nevertheless, you tin can click on the Refresh icon next to the drop downwardly menu.
7. Click Begin copying
8. When done, exit the Windows 7 USB/DVD Download Tool

   

   Windows vii USB/DVD Download Tool: Done

If you accept the installation disc (DVD)

If you accept the original installation disc (DVD) of Microsoft Windows eight or Windows 8.ane you tin can create a bootable USB bulldoze.

To practise so, follow the steps beneath:

1. Boot into Windows 8 or 8.1
2. Open Control Prompt equally Administrator. To practise so, press the and C primal to search for cmd. From the search results list, right-click on Command Prompt
   
3. Click Run as administrator
   
4. Enter the countersign, when prompted
5. When Command Prompt opens, type this command and press Enter:

   diskpart

6. Insert the USB wink drive in the port
7. Blazon list disk, press Enter

   

   Command Prompt: list disk

8. Identify the number adjacent of the USB bulldoze in the list provided past the listing deejay command
9. Type select deejay 10, printing Enter. Replace Ten with the number of the USB drive listed from above steps.

   

   Control Prompt: select disk

   The confirmation bulletin should exist:

   Disk 1 is now the selected deejay.

10. Type clean, press Enter
11. Type create partition primary, printing Enter
12. Blazon select partition i, press Enter
13. Type active, press Enter
14. Blazon format fs=ntfs, press Enter. To have the USB drive formatted more quickly, add the quick parameter: format fs=ntfs quick
15. Type assign, press Enter
16. Type go out, press Enter
17. Copy the contents of the Windows 8 DVD or 8.one DVD to the USB flash drive

Create a Windows 10 bootable USB

If you have the ISO paradigm

Using Easy USB Creator 2.0

Like shooting fish in a barrel USB Creator can quickly convert the ISO images into bootable USB drives, with but a unmarried click:

Download Easy USB Creator two.0

To fire Windows 10 to a USB drive using Piece of cake USB Creator two.0, just follow these steps:

1. Download USB Creator two.0
2. Install Easy USB Creator ii.0
3. Browse the Windows 10 ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Drive field
5. Start

Piece of cake USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It's compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.i, Windows x plus the Windows Server editions (2003, 2008, 2012). You must have .NET Framework 2.0 or college in order to use Easy USB Creator ii.0

Using Windows seven USB/DVD Download Tool

The Windows vii USB/DVD Download Tool is bachelor to download and y'all can employ it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

While the proper noun is "Windows 7", you tin use this tool on a Windows 10 system too.

Before you lot go along with these instructions, please make sure that:

• You have the Windows seven USB/DVD Download Tool downloaded. If not, download the Windows seven USB/DVD Download Tool now.
• You accept the Windows ten ISO Prototype set up

The instructions are:

1. Launch the Windows 7 USB/DVD Download Tool
2. At the Source File field, click Browse and notice the Windows x ISO prototype on your computer

   

   Windows 7 USB/DVD Download Tool: Source File

3. Click Adjacent
4. Insert the USB flash bulldoze in an available port on your computer. Make certain it's loaded in My Computer.
5. At Step two, select USB Device to write the ISO paradigm to the USB bulldoze. Yous can click DVD to write the ISO image to a DVD instead.

   

   Windows vii USB/DVD Download Tool: Choose Media Type

6. At Step 3, select the USB flash drive from the driblet down menu. If the drive isn't loaded yet, you lot can click on the Refresh icon next to the drop down card.
7. Click Begin copying
8. When done, get out the Windows vii USB/DVD Download Tool

   

   Windows 7 USB/DVD Download Tool: Done

If you take the installation disc (DVD)

If you accept the original installation disc (DVD) of Microsoft Windows 10 you lot can create a bootable USB drive.

To do and then, follow the steps beneath:

1. Boot into Windows 10
2. Open Command Prompt as Administrator. To do so, press the and C primal to search for cmd. From the search results list, make sureCommand Prompt is the called result than use the "Run every bit Administrator" choice on the side:
   
3. Enter the password, when prompted
4. When Control Prompt opens, type this command and press Enter:

   diskpart

5. Insert the USB flash drive in the port
6. Blazon list disk, press Enter

   

   Command Prompt: listing disk

7. Identify the number next of the USB bulldoze in the listing provided by the list disk control
8. Type select disk X, press Enter. Supervene upon X with the number of the USB bulldoze listed from to a higher place steps.

   

   Control Prompt: select deejay

   The confirmation message should be:

   Disk 1 is now the selected disk.

9. Type clean, press Enter
10. Type create partitioning main, press Enter
11. Type select partition 1, printing Enter
12. Type active, press Enter
13. Type format fs=ntfs, press Enter. To have the USB drive formatted more than quickly, add the quick parameter: format fs=ntfs quick
14. Blazon assign, press Enter
15. Type exit, press Enter
16. Copy the contents of the Windows ten DVD to the USB flash bulldoze

Troubleshooting

Setup cannot find the End User Licensing Agreement (EULA)

You may receive this mistake when trying to write a Windows (XP, Vista, seven, viii, 8.1) ISO Paradigm to a USB bulldoze and make information technology bootable:

Setup cannot notice the End User Licensing Agreement (EULA) Setup cannot continue.  To Quit, Printing F3

If and so, the ISO epitome might exist corrupted. In this example, you tin can try:

• download a new ISO prototype from Microsoft
• utilize the original installation disc instead to create the bootable drive (instructions for using the disc instead of the ISO prototype are available in this guide for all Windows versions)
• utilise Easy Recovery Essentials if yous're looking for accessing repair tools. Run EasyRE'due south Automatic Repair characteristic to automatically browse and prepare various boot errors. Other features are bachelor.

Download Windows vii USB/DVD Download Tool

To download the Windows 7 USB/DVD Download Tool, become to http://wudt.codeplex.com/.

Bootable USB will non boot

To brand sure that the USB bulldoze will boot when starting your computer, brand sure that:

• Your BIOS configuration allows USB drives to boot showtime and so boot from hard disk. Follow the steps from BIOS/UEFI configuration or the our Boot from USB drive guide.

If you lot created the bootable USB drive using the Windows 7 USB/DVD Download Tool, new computers with UEFI might not kicking from the USB as it'southward been formatted using NTFS and non FAT32.

To go around this, follow these steps:

1. After the Windows 7 USB/DVD Download Tool successfully created the bootable USB drive, go to My Computer and copy all contents from the USB bulldoze to a folder on your Desktop

   

   Windows 7 USB/DVD Download Tool: Done

2. Right-click on the USB Drive in My Estimator and format information technology as FAT32
3. After the format process is complete, copy all files from the folder you created on your Desktop back to the USB bulldoze

More Information

Support Links

• Like shooting fish in a barrel Recovery Essentials for Windows – our repair and recovery deejay.

  Information technology's an easy-to-use and automatic diagnostics disk. It's available for Windows 8, Windows vii and Windows Vista. It's besides available for Windows XP and Windows Server.

  Read more at Windows Recovery Disks.

• The NeoSmart Support Forums, fellow member-to-fellow member technical support and troubleshooting.
• Get a discounted price on replacement setup and installation discs: Windows XP, Windows Vista, Windows 7, Windows 8, Windows x, Windows 11.

Applicative Systems

This Windows-related knowledgebase article applies to the following operating systems:

• Windows XP (all editions)
• Windows Vista (all editions)
• Windows 7 (all editions)
• Windows eight (all editions)
• Windows 8.i (all editions)
• Windows 10 (all editions)
• Windows 11 (all editions)
• Windows Server 2003 (all editions)
• Windows Server 2008 (all editions)
• Windows Server 2012 (all editions)

Propose an edit

Source: https://neosmart.net/wiki/bootable-windows-usb/

Posted by: hayesancour.blogspot.com

Share this post