How To Turn Off Bitlocker Windows 10

How to disable BitLocker encryption?

If Bitlocker encryption is enabled, the storage location of the content nowadays in the encrypted bulldoze of the imaging calculator cannot be identified. Hence, decrypting the contents of the bitlocker encrypted drive is essential for efficient imaging.

Y'all can utilize the following methods to remove bitlocker encryption in Windows ten, Windows 11, and all other Windows operating systems:

1. Through Windows Command Prompt
2. Through Windows GUI style
3. Through Windows Power shell mode

1) Through Windows Command Prompt

Ensure that you take logged onto Admin user account to turn off bitlocker encryption. Follow the steps given below to turn off bitlocker encryption using Command Prompt.

1. Open Command prompt in Administrator mode.
2. To check the status of BitLocker encryption in the system execute the command given below.

   manage-bde -status

3. Ensure that the results for the required drives(C:, D:, etc) are as follows.

   Conversion Status : Fully Decrypted

   Pct Encrypted : 0.0%

   

4. If the event is "Percentage Encrypted : 100.0%", decrypt the BitLocker for the required drives using the commands given below.

   manage-bde -off <bulldoze letter of the alphabet>:

   Eastward.one thousand.: manage-bde -off C:
5. Check the BitLocker status subsequently disabling using the command ( manage-bde -status ) and ensure that the "Per centum Encrypted : 0.0%", before proceeding with the epitome creation process.

2) Through Windows GUI mode

Ensure that yous have administrator credentials to remove bitlocker encryption. Follow the steps given below to remove bitlocker encryption in GUI mode,

1. Click Start, click Command Panel, click System and Security, and so click BitLocker Drive Encryption.
2. Look for the drive on which yous want BitLocker Drive Encryption turned off, and click Turn Off BitLocker.
3. A message will be displayed, stating that the drive will be decrypted and that decryption may take some fourth dimension. Click Plow off Bitlocker / Decrypt the drive to continue and plough off BitLocker on the drive.

This might take some time to decrypt the drive and remove BitLocker protection.

How to ensure if the Bitlocker encryption is removed?

You tin can ensure if the BitLocker encryption is removed by checking if the Bitlocker lock icon is removed in the particular drive and by accessing the particular bulldoze. You tin can repeat the same steps to disable Bitllocker Encryption in other drives.

3) Through Windows Powershell mode

To disable Bitlocker encryption in Windows Powershell mode, Windows Power crush must be installed in your system. If not download & install proper Windows Powershell version from Microsoft website. Too check the Powershell System requirements before proceeding installation.

Annotation: If the partition with the operating system contains any automatic unlocking keys, the cmdlet to disable bitlocker encryption will not work. You can use the Clear-BitLockerAutoUnlock  cmdlet in Powershell window to remove all automated unlocking keys to disable BitLocker for the partition.

How to Disable Bitlocker for all volumes?

1. Open Windows Powershell in Ambassador fashion and execute the following commands
   • PS C:\>$BLV = Get-BitLockerVolume
   • PS C:\>Disable-BitLocker -MountPoint $BLV
2. Verify the decryption process past using below method
   • Execute command: PS C:\> Get-BitlocerVolume
   • Check decryption progress in "Volume Condition" & "Encryption Percentage". Also these values must be "FullyDecrypted" & 100%  to ostend the decryption completion.

   or

   • Progress can be seen in Control Panel -> Organization and Security -> BitLocker Drive Encryption.

How to Disable Bitlocker for a single volume?

1. Open up Windows Powershell in Administrator mode
2. Disable-BitLocker -MountPoint "C:"
3. Verify the decryption process by using beneath method
   • Execute the command: PS C:\> Get-BitlocerVolume -MountPoint "C:"
   • Check decryption progress in "Volume Condition"  & "Encryption Percentage". Also these values must be "FullyDecrypted" & 100% to confirm the decryption completion.

   or

   •  Progress can be seen in Command Console -> Organisation and Security -> BitLocker Drive Encryption .

Await until information technology shows that Bit locker encryption is turned off .

How To Turn Off Bitlocker Windows 10,

Source: https://www.manageengine.com/products/os-deployer/help/how-to-disable-bitlocker-encryption.html

Posted by: hayesancour.blogspot.com

Share this post